Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in South Boston?
Spring replacement in South Boston typically costs $210 to $400 for a single spring, including the part and labor. Most doors carry a matched pair, and since both springs are almost always replaced together, a pair usually lands around $420 to $800. That figure covers a standard torsion spring job; the written estimate you get before any work starts sets the final price.
South Boston’s housing stock shapes this number more than people expect. The triple-deckers and older two- and three-bay garages that fill the neighborhood run narrow doors with tight headroom, and a lot of them were framed before anyone thought about spring clearance. When a spring sits in a cramped housing or behind a low-header track, getting it out and a new one wound in takes longer, and that comes through in the estimate. A tilt-up door on a mid-century brick garage is a different job entirely. We price per door, not per neighborhood, because two garages on the same South Boston street can be built nothing alike.
We answer 24/7 for questions about pricing and scheduling. Fast dispatch from 7am to 7pm, Sunday through Friday, and same-day service is often possible when a spring lets go. Our technicians have up to 10 years of experience, and spring work is a core service for us, not something we hand off.
Spring Replacement Cost Breakdown (2026)
The table below shows typical estimated ranges for spring-related work in South Boston. Every line is an estimate; the written quote is what you actually pay.
| Item | Typical Estimated Range |
|---|---|
| One torsion spring replaced | $210 – $400 |
| Matched pair of springs (both replaced) | $420 – $800 |
| Full garage door repair (spring plus related fixes) | $175 – $710 |
| Cable repair, when a cable fails alongside the spring | $155 – $295 |
| Track realignment, if the door shifted off line | $140 – $285 |
| Roller replacement, if worn rollers show while the door is open | $130 – $260 |
| Panel replacement, if a section was damaged by a snapped spring | $295 – $590 |
| Opener repair or adjustment after the spring job | $140 – $380 |
What pushes a spring job toward the top of the range? Spring type and size first. A heavy timber door on an old South Boston carriage-style garage needs a larger wire gauge than a lightweight aluminum door on a newer build, and larger springs cost more. Second, whether the job is one spring or two. A pair is roughly double a single because it’s double the part and double the winding work, and we won’t replace one side of a matched pair and leave the other to fail. Third, whatever the spring took with it. When a torsion spring snaps, it can bend a cable, knock the door off its track, or crack a bottom panel. Those repairs are priced on top, which is why a full repair range runs wider than the spring alone.
What Affects Spring Replacement Pricing in South Boston
A few things move the number on any given job. Here’s what we look at when we walk into a South Boston garage.
- Spring type and size. Torsion springs (mounted on a shaft above the door) and extension springs (stretched along the sides) are priced differently, and a heavier door needs a bigger spring. Tell us what you have when you call and we can narrow the range before we arrive.
- One spring versus a matched pair. Most doors are designed to run two springs together. Replacing just one usually means the new spring carries more load than the old one and fails sooner, so a pair is the sensible job and roughly twice the price.
- Garage layout and headroom. Tight South Boston garages, low-clearance headers, and doors boxed in by storage or a tight alley approach all add time. A clean, open bay is faster to work in than a packed one.
- Door material and weight. A solid wood door or an older steel door with a thick frame loads the springs harder than a modern insulated panel door. Weight drives spring size, and spring size drives cost.
- Related wear found during the job. Cables, drums, and bearings on an older door are often at the end of their life right when the spring goes. We’ll point out what we see and price it separately so you can decide.
- Brand of door and hardware. We know the brands we work with – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – which means a Clopay or Amarr door gets the right spring for its actual weight rating rather than a generic guess.
How to Save on Spring Replacement
The single biggest way to save is to catch the spring before it snaps. A spring that’s starting to fail often gives warning: a door that feels heavier than it used to, a bang from the garage on cold mornings, or a visible gap in the coil. If you notice any of those, call for an inspection before you’re stuck with a door that won’t open.
- Snap the door into a free estimate early. A written estimate costs nothing and lets you budget. Call (844) 662-2561 and we’ll set one up.
- Replace the pair, not one side. It sounds like more money up front, but a lone replacement often comes back for the second spring within a year or two. One job, one pair, fewer return visits.
- Address cables and bearings while we’re in. If a cable is frayed or a bearing is grinding during a spring job, fixing it now saves a second visit and a second estimate later.
- Keep the door balanced. A door that’s been running out of balance for months wears the springs faster. Have it checked when you first notice it fighting you.
- Use the parts we carry. Because we supply garage door parts, a common spring can often go in on the first visit rather than waiting on a special order. That shortens the job and keeps the labor simple.
Springs are under extreme tension, and this is not a job to take on yourself. A torsion spring holds enough stored energy to injure someone badly if it’s released the wrong way. That’s why we treat spring work as a specialist task. We’d rather talk you through the price and do it safely than have you risk a hand or a wrist. Our Garage Door Repair South Boston team handles spring jobs as a standard part of the work, and you can read more about the process on our spring replacement page.
FAQs – Spring Replacement Cost
How much does a garage door spring cost in South Boston?
A single spring replacement in South Boston typically costs $210 to $400. If both springs in a matched pair are replaced, expect around $420 to $800. The written estimate sets the final price, and if the spring took a cable or a panel with it, those repairs get priced separately. Call (844) 662-2561 for an exact quote – estimates are free.
Is it cheaper to repair a spring or replace the whole door?
Repairing the spring is almost always cheaper, at $210 to $400 for one spring versus $825 to $2595 for a new door installation. Replace the whole door only when the panels, track, and frame are worn out along with the spring. A door in otherwise good shape needs a spring, not a replacement. Call (844) 662-2561 and we’ll tell you honestly which one your door needs.
Why does a pair of springs cost twice as much as one?
Because it’s essentially double the part and double the winding work. A pair runs about $420 to $800 versus $210 to $400 for a single. Most doors are built to run two springs together, and replacing just one leaves the new spring carrying the load the old one was sharing, which shortens its life. We’ll explain which setup your door has before any work starts.
Can you come today if my spring snapped?
Often yes. Same-day service is frequently possible in South Boston when a spring fails and the door won’t open. We answer 24/7 to book the job. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 662-2561 and we’ll get you on the schedule.
Does the price include the part and the labor?
Yes. The $210 to $400 range for one spring and the $420 to $800 range for a pair both include the spring and the labor to install it. What’s not included is anything else the failed spring damaged, like a cable, track, or panel. Those show up as separate lines on the written estimate. Call (844) 662-2561 for a free, itemized quote.
What brands of door do you work on?
We’re trained on eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That matters for spring work because the right spring is matched to the actual weight of the door, and knowing the brand means we’re choosing the correct spring rather than a general-purpose fit. If your South Boston door is one of those brands, we’ll recognize the system when we arrive.
Getting a Free Estimate on Spring Replacement in South Boston
An estimate costs nothing and it’s the fastest way to turn a “maybe it’s the spring” into a real number. We’ll look at the door, the springs, and the surrounding hardware, then hand you a written price before anything is touched. There’s no fee to get it, and the price is set per job by that written estimate.
We answer 24/7 when you call, and we can often get a technician out the same day when a spring has failed. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 662-2561 for a free estimate on spring replacement in South Boston.
Pricing reflects the South Boston market as of 2026. Garage Door Repair South Boston offers free estimates – call (844) 662-2561.
Written by the team at Garage Door Repair South Boston.
What Our Customers Say
"They were the only ones willing to just tell me the price. Everyone else wanted to "come take a look" first, which in my experience means come apply pressure in person."
- Tim Novak"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Dana Ziegler"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Brooke Sullivan