Panel Replacement Cost in South Boston - Typical Price Ranges, Then Your Exact Quote

Typical price ranges for the work, then a free exact quote for your door. No call-out fee to find out where you land, and the price is agreed before work starts.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (844) 662-2561

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
How Much Does Panel Replacement Cost in South Boston, MA? (2026 Price Guide) | Garage Door Repair South Boston
Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door

You get a price before we start. It does not change when the pro arrives.

Get your free estimate
Explore

Styles & brands we work with

  • Raised-panel steel
  • Carriage house
  • Modern flush
  • Full-view glass
  • LiftMaster openers
  • Chamberlain openers
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your garage door?Free estimate, price agreed before work starts
Call (844) 662-2561

How Much Does Panel Replacement Cost in South Boston?

Panel replacement in South Boston typically costs $295 to $590 for a single section, and the written estimate you get before any work starts is the price that sets the final number. A one-car door section sits at the low end of that range; a wide, insulated, or custom-profile section from Clopay, Amarr, or Raynor lands near the top. If more than one panel is bent, the total climbs with each section added, which is why a walkthrough and a written quote matter more than a phone number.

We connect you with independent local professionals who handle this work, and they are licensed and insured as their state requires. Our technicians have up to 10 years of experience. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.

Key Takeaways

  • Typical panel replacement in South Boston: $295 – $590 per section.
  • Single-panel swaps are often same-day; multiple panels or discontinued profiles take longer.
  • Brand and profile matching drives much of the cost. We work with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
  • Free estimates, and the written quote sets the final price.
  • Springs, cables, and opener faults are separate line items if they come up during the visit.

Panel Replacement Cost Breakdown (2026)

Here are typical estimated ranges for the South Boston market. These are estimates, not quotes. Your written estimate after the technician looks at the door sets the final price.

Line item Typical estimated range
Single steel panel section (standard) $295 – $385
Single insulated panel section $360 – $480
Wide or double-car panel section $430 – $590
Panel replacement labor (included in above) Built into the section price
Track realignment (if a bent track caused the panel damage) $140 – $285
Cable repair (if a frayed cable is found during the visit) $155 – $295
Spring repair, one spring (if the spring is the reason the door slammed the panel) $210 – $400
Roller replacement (pair matched to new panels) $130 – $260
Opener repair (if the opener drove the door into an obstruction) $140 – $380
Full garage door repair package (mixed issues) $175 – $710

The section price carries the labor, so what you’re paying for beyond the part is the brand match, the profile match, and the access. South Boston door widths run narrow on some of the older multi-family streets near Telegraph Hill and Thomas Park, and a narrow single door takes a shorter panel than a newer townhouse on the Seaport edge. That width difference alone moves the estimate by $80 to $150. On the other hand, a two-panel fix where both sections are the same color and profile can land close to a single-panel price per section because the installer only sets up once.

What pushes cost up: an insulated panel matching a specific R-value profile from Clopay or Amarr, a long-panel section on a wide door, a discontinued color that has to be ordered, and any hidden damage behind the panel (a bent hinge, a worn roller, a track that needs realignment). What pulls it down: a standard steel section, a color still in production, and a door where the other panels and hardware are sound.

Want to talk it through?Free estimate, price agreed before work starts
Call (844) 662-2561

What Affects Panel Replacement Pricing in South Boston

Five things drive the range more than anything else. If you know which ones apply to your door, the estimate will feel predictable instead of open-ended.

  • Door width and panel profile. South Boston has a lot of narrow single-bay garages tucked behind triple-deckers, and a short section is cheaper than a wide one. A standard 8-foot-wide section and a 16-foot-wide section sit roughly $130 apart. The profile (raised-panel versus flush) also changes the order lead time.
  • Brand and color match. Lining up a replacement section for a Clopay, Amarr, Wayne Dalton, or Raynor door is the part that trips up generalists. If the color or profile is discontinued, the section has to be specially ordered, and the estimate reflects that. We’re factory-familiar with these brands, which is the difference between one visit and three.
  • Insulation. A non-insulated steel section is the cheaper end. An insulated section adds material cost, and if you’re trying to match an existing insulated door’s look and feel, you can’t substitute a hollow panel without a visible seam difference.
  • What caused the damage. A backed-into panel is a clean swap. A panel bent because a spring failed or a cable snapped usually means the spring or cable gets addressed too, and that adds a line item from the spring ($210 – $400) or cable ($155 – $295) range. We always recommend fixing the cause before the panel, not after.
  • Door height and access. A standard 7-foot door is routine. An 8-foot door, or a garage with a low clearance or a tight side room, takes longer and can push the estimate toward the top of the range. Older garages in the Andrew Square area are the usual culprits on this one.
  • Hardware condition. Hinges, rollers, and bottom brackets that are already worn get replaced at the same time so the new panel sits flat. That’s a modest add, and it saves a return visit. Rollers run $130 – $260 as a set.

One note on the neighborhood mix: South Boston’s housing stock runs from brick row houses near City Point to newer builds near the waterfront, and the door sizes and opening heights are not the same across those blocks. That’s exactly why a phone quote is a rough guide and a written estimate is the real answer. The technician has to see the door.

How to Save on Panel Replacement

A few practical moves lower the bill without compromising the fix.

  • Fix one panel, not the door. If a single section is crushed and the other three are intact, replace the section, not the whole door. A full new door installation runs $825 – $2595, so staying with a section keeps the cost in the hundreds, not the thousands.
  • Match the profile, not the exact discontinued color. If your original color is off the market, a close standard color often reads fine from the street and saves the special-order charge. A technician can show you the nearest matches.
  • Bundle the cause with the cure. If a failed spring or frayed cable is what bent the panel, replace both in the same visit. Separate visits mean paying the setup twice. Spring repair runs $210 – $400 for one spring, and a matched pair is usually replaced together, so a pair costs about twice that range.
  • Get the estimate in writing before anyone touches the door. That’s the number that governs the job. No surprises, no renegotiation.
  • Keep the rest of the hardware in good shape. A door that runs straight, with rollers replaced on schedule, is less likely to bend another panel. If you’re not sure of the hardware’s condition, ask during the estimate visit.

For a professional look at which panel needs replacing and what the total will be, call us for a free estimate at (844) 662-2561. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Need a price for your garage door?Free estimate, price agreed before work starts
Call (844) 662-2561

How Long Does Panel Replacement Take in South Boston?

Most single-panel replacements take under an hour once the section is on hand, and same-day service is often possible if the panel is a common brand and size. If the section has to be ordered (a discontinued color, an insulated custom profile, or a wide double-car panel), expect a few days for delivery before the install visit.

Multi-panel jobs on the same door take longer because the technician has to rebalance the door after setting each section. That rebalancing is where spring work and cable work get checked too, so it’s worth planning the visit for when you can be there. For a closer look at what a section swap involves, see our panel replacement guide.

The main thing that delays a panel replacement is a brand match we can’t confirm over the phone. A photo of the panel and the brand label inside the door is often enough to sort it out. If you’re not sure of the brand, tell us the color and door width and we’ll work it out when the technician arrives.

Can You Replace Just One Panel?

Yes, in most cases a single panel can be replaced without swapping the whole door. The replacement section has to match the door’s profile, color, and width, and the surrounding panels and hardware need to be in good shape. If they’re not, you’ll see the new section sit slightly proud or slightly recessed.

A single-panel replacement is the common case for impact damage from a car or a bicycle, or a bottom panel that’s dented from years of use. When a spring fails and the door crashes down, that often bends the bottom two or three panels, and the honest answer is to look at whether a full door makes more sense. We’ll say so if that’s the case. Full door installation runs $825 – $2595, so the math is worth doing before committing to a section-by-section fix.

What’s the Difference Between Panel Replacement and a Full Door Replacement?

Panel replacement fixes a damaged section while you keep the existing door and opener. Full door replacement swaps the entire door and typically the hardware. The cost difference is large: $295 – $590 for a section versus $825 – $2595 for a new door, and that gap is why an honest diagnosis matters.

We lean toward a section replacement when the door structure is sound and the damage is isolated. We lean toward a full door when the panels are rusted through, when the frame has taken a hit, or when the door is a discontinued model that can’t be matched. The decision usually comes down to how much of the door is affected and whether the opener is worth keeping. Opener installation, if the door is being replaced and the opener is aging out, runs $295 – $650 on its own.

FAQs – Panel Replacement Cost

How much does panel replacement cost in South Boston?

Panel replacement in South Boston typically costs $295 to $590 for one section, with insulated and wide double-car panels at the top of that range and standard steel sections at the bottom. The written estimate after the walkthrough sets the exact price. Call (844) 662-2561 for a free quote.

Questions about your garage door?Free estimate, price agreed before work starts
Call (844) 662-2561

Can you replace a panel on a Clopay, Amarr, or Wayne Dalton door?

Yes. We’re set up for Clopay, Amarr, Wayne Dalton, Raynor, LiftMaster, Chamberlain, Genie, and Craftsman equipment, and matching a panel to those profiles is routine for our technicians. Expect the estimate to reflect the specific section and any order lead time. Call (844) 662-2561 with the door brand and color and we’ll narrow it down.

Is it cheaper to repair a panel or replace the whole door?

Repairing one panel is much cheaper: $295 to $590 versus $825 to $2595 for a new door. Go with the section replacement when the rest of the door is sound, and with a full door when multiple panels are damaged or the model is discontinued. Call (844) 662-2561 and we’ll give you a straight answer after looking at the door.

Can you come today for a panel replacement?

Same-day service is often possible when the panel is a common brand and size in stock. If the section has to be ordered, the install visit is booked for after delivery. Call (844) 662-2561. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.

Does panel replacement cost more if a spring failed and bent the panel?

Yes, because the visit covers both the panel and the failed spring. Add $210 to $400 for a single spring, and a matched pair is usually replaced together, so a pair costs about twice that range. Fixing the cause in the same visit is cheaper than a second trip. Call (844) 662-2561 for a combined quote.

Will homeowners insurance cover panel replacement?

Sometimes, depending on the cause of the damage and your policy. We can work with your insurer on documentation, but the coverage decision is theirs. The free written estimate is a useful document to have on hand either way. Call (844) 662-2561 to set one up.

Why the Specialist Matters for the Panel and Everything Around It

Panel replacement is one job in a system. The section has to match the door, the door has to balance on the springs, the springs and cables have to be sound, and the opener has to lift a door it was tuned for. Get any of those wrong and the new panel sits in a door that doesn’t run right. That’s why we focus on the whole system: opener repair, spring repair, cable work, tracks, rollers, and installation, so a panel fix isn’t undone by a component the previous generalist missed.

On safety: springs and cables are under high tension, and a garage door that isn’t balanced can drop without warning. If a panel is bent because the door slammed, treat that as a sign the spring or cable needs a professional look before anyone puts weight on the door again. We recommend leaving spring and cable work to a trained technician. Our technicians have up to 10 years of experience, and spring work is a standard offering for us, not a referral.

If you’re sorting out a panel and the door has other issues, start with the main garage door repair South Boston page for the full picture. We’re a single-trade specialist, so 100% of every visit is garage doors. Panel repairs, spring repairs, opener work, hardware, and installations all sit under that one roof of expertise.

Get a Free Panel Replacement Estimate

If a panel on your garage door is bent, dented, or damaged, a written estimate is the fastest way to know what the fix will cost. Call Garage Door Repair South Boston at (844) 662-2561 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. The written estimate sets the final price, and there’s no charge to get one.

Whether the damage is a single ragged section or a door that’s taken several hits, the visit covers the section, the balance, and any spring or cable problem that explains how the panel got bent. We know your brand, and we’ll tell you what to replace and what to leave alone.

Written by the team at Garage Door Repair South Boston.

Pricing reflects the South Boston market as of 2026. Garage Door Repair South Boston offers free estimates – call (844) 662-2561.

What Our Customers Say

★★★★★ 4.9 from 11+ reviews

"They were the only ones willing to just tell me the price. Everyone else wanted to "come take a look" first, which in my experience means come apply pressure in person."

- Tim Novak

"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."

- Dana Ziegler

"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."

- Brooke Sullivan
Need Garage Door help in South Boston? Licensed & insured · same-day response · free estimates
Call (844) 662-2561

Request a Free Estimate

Tell us what's going on in South Boston. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7
Local Service Coverage
Garage Door Repair South BostonGarage Door Repair South EndGarage Door Repair East BostonGarage Door Repair Beacon HillGarage Door Repair Back BayGarage Door Repair North EndGarage Door Repair Mission HillGarage Door Repair RoxburyGarage Door Repair CharlestownGarage Door Repair DorchesterGarage Door Repair FenwayGarage Door Repair Jamaica PlainGarage Door Repair ChelseaGarage Door Repair Winthrop TownGarage Door Repair EverettGarage Door Repair CambridgeGarage Door Opener Repair South BostonGarage Door Opener Repair South EndGarage Door Opener Repair East BostonGarage Door Opener Repair Beacon HillGarage Door Opener Repair Back BayGarage Door Opener Repair North EndGarage Door Opener Repair Mission HillGarage Door Opener Repair RoxburyGarage Door Opener Repair CharlestownGarage Door Opener Repair DorchesterGarage Door Opener Repair FenwayGarage Door Opener Repair Jamaica PlainGarage Door Opener Repair ChelseaGarage Door Opener Repair Winthrop TownGarage Door Opener Repair EverettGarage Door Opener Repair CambridgeGarage Door Installation South BostonGarage Door Installation South EndGarage Door Installation East BostonGarage Door Installation Beacon HillGarage Door Installation Back BayGarage Door Installation North EndGarage Door Installation Mission HillGarage Door Installation RoxburyGarage Door Installation CharlestownGarage Door Installation DorchesterGarage Door Installation FenwayGarage Door Installation Jamaica PlainGarage Door Installation ChelseaGarage Door Installation Winthrop TownGarage Door Installation EverettGarage Door Installation CambridgeGarage Door Spring Repair South BostonGarage Door Spring Repair South EndGarage Door Spring Repair East BostonGarage Door Spring Repair Beacon HillGarage Door Spring Repair Back BayGarage Door Spring Repair North EndGarage Door Spring Repair Mission HillGarage Door Spring Repair RoxburyGarage Door Spring Repair CharlestownGarage Door Spring Repair DorchesterGarage Door Spring Repair FenwayGarage Door Spring Repair Jamaica PlainGarage Door Spring Repair ChelseaGarage Door Spring Repair Winthrop TownGarage Door Spring Repair EverettGarage Door Spring Repair CambridgeGarage Door Parts South BostonGarage Door Parts South EndGarage Door Parts East BostonGarage Door Parts Beacon HillGarage Door Parts Back BayGarage Door Parts North EndGarage Door Parts Mission HillGarage Door Parts RoxburyGarage Door Parts CharlestownGarage Door Parts DorchesterGarage Door Parts FenwayGarage Door Parts Jamaica PlainGarage Door Parts ChelseaGarage Door Parts Winthrop TownGarage Door Parts EverettGarage Door Parts Cambridge
Call Now - We Answer 24/7