Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Everett
If your Everett garage still has the door it was built with, you’re not alone. Plenty of homes here are working with a one-piece wood door and original extension springs from the 1900 to 1950 era, and at some point the repair math stops making sense. We install new garage doors across Everett, from the streets off Broadway to the lots up around Glendale, and we know what these older garages demand: low-clearance fits, custom torsion retrofits, and narrow access that rules out a truck backed right up to the door. Call (844) 662-2561 for a free measure and a written price.
Why Everett Homeowners Call Garage Door Repair South Boston for Garage Door Installation
We’re a single-trade garage door company. Every call is a door, an opener, a spring, or the parts that connect them, and that focus shows when a job gets unusual. The installs here are unusual more often than most towns.
For a start, Everett’s housing stock shapes the work. Detached single-car garages built between 1900 and 1950 sit at the back of deep, narrow lots off Broadway and around Glendale, and there’s rarely drive-up access. Our technicians are used to carrying a door panel and hardware through a side yard or over a fence. That’s normal here, not an obstacle. Our technicians have up to 10 years of experience and are trained on the major brands homeowners already have: Amarr, Wayne Dalton, Craftsman, Raynor and the rest of the eight we work with.
What you get is a real assessment, not a sales pitch. If the existing drums, cables and end bearing plates can be upgraded to a modern torsion system, we’ll say so. If the door is past saving, we’ll explain why. Either way the free measure comes first and the written estimate sets the price before any work starts. We answer 24/7, and fast dispatch from 7am to 7pm gets a technician out to Everett to look and quote.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Everett
New Door Installation
When a legacy door finally gives out, we replace it with a modern sectional door sized to the actual opening. Everett garages are often a few inches tighter than the standard, so we measure the headroom and side clearance carefully before ordering. A new door typically runs $700 – $2,200 installed here, and the written estimate pins down your exact figure.

Single Car Door
The single-car door is the Everett standard. This is where our work is concentrated, and where a low-headroom torsion setup often replaces the old extension springs. We balance the new door properly, align the track, and set the photo-eye sensors so the system seals against the weather once the freeze-thaw season starts.

Double Car Door
A few of the larger homes and converted multi-family buildings have a double opening, though this is less common than in neighboring suburbs with newer double-bay construction. When we do install a double door in Everett, we plan the order and schedule around the wider panel and the access to the lot.

Custom Garage Door
When a shed or a fence now blocks the original door opening, or the clearance is too low for a standard setup, a custom-fit door is the answer. We work with steel and wood and can size a door to a one-off opening. If you want a specific look, our garage door installation team can walk you through the options.
Steel Doors
Steel is a solid choice for Everett because it holds up against salty coastal air and the wet winters better than raw wood. Rust is still the enemy, so we pay attention to how well the door seals at the bottom, where road salt and standing water tend to collect.
Trusted Brands We Service in Everett
Homeowners here already own name-brand doors and openers, and we know those systems. We’re factory-familiar with eight of the industry’s leading brands, including Amarr, Wayne Dalton, Craftsman and Raynor, so when we quote a replacement we’re matching the new door to the opener and hardware you have rather than starting from scratch. That matters on older Everett garages where the opener may be a legacy model. On openers, our repair and install coverage spans both the LiftMaster and Chamberlain platform and Genie, smart-enabled or legacy. We don’t claim parts on a truck or a local warehouse; what we do is order the right door for your opening and give you a written price up front.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Installation Problems We See in Everett Homes
A typical Everett installation starts when a homeowner discovers the original one-piece wood door, common to early-1900s garages, won’t lift reliably anymore. The extension spring has snapped, or the opener has worn out, and the door may also bind because the concrete apron has heaved. Here’s what we run into:
- Snapped extension springs on old single-car doors. Original extension springs on 1900 to 1950 wood doors fail after decades, and when they go they can damage the door or the opener. The fix is usually a full torsion-spring retrofit rather than another extension spring.
- Freeze-thaw heave at the apron. Each spring the concrete slab shifts, and the door starts to bind and the weather seal fails. That leaves steel tracks and springs exposed to moisture and rust.
- Low clearance with a shed or fence in the way. Standard installs need room to work, and many Everett lots don’t offer it. Custom low-headroom torsion setups and manual carry-in of the door are part of the job.
- Garages converted to storage or living space. When a garage changes use, any door replacement has to respect setback and egress rules, so we walk you through what the city’s building department will expect.
Pricing for Garage Door Installation in Everett, MA
Here’s what a new door runs in Everett. These are typical estimated ranges, and the written estimate you get after the free measure sets the final price.
| Service | Typical Estimated Range |
|---|---|
| New Door Installation | $700 – $2,200 |
| Garage Door Repair | $150 – $600 |
What moves you within that range: door size, material (steel versus wood), whether the opening needs a custom fit, and whether the job requires a torsion retrofit because the old hardware can’t be reused. Single-car steel doors tend to land at the lower end; a custom-fit wood door on a tight lot sits higher. The good news is you’ll know the number before we start. The price is quoted and agreed before any work begins, and the estimate itself is free.
We Also Serve Cities Near Everett
Everett sits close to a lot of the region, and we serve neighborhoods in Everett and the towns around it, including Chelsea, Charlestown, the North End and East Boston. The housing differs from town to town, but the same careful measuring and written pricing applies wherever the garage is. If your door is in one of these nearby areas, the process is the same.
Serving Everett, MA – Our Local Coverage Area
We serve Everett and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Everett
Yes, in most cases a 1940s one-piece wood door can be replaced with a modern sectional door. The catch is clearance: these garages tend to be tight, so we measure headroom and side room first and, if needed, set up a custom low-headroom torsion system. The written estimate tells you exactly what the swap involves. Call (844) 662-2561 for a free measure.
If the doors are original extension springs from the 1900 to 1950 era, they should almost always be swapped for a modern torsion system when you install a new door. Extension springs that old are near the end of their life and can snap, and a torsion setup is safer and better suited to a new sectional door. We’ll confirm during the on-site assessment. Call (844) 662-2561 to book it.
A new single-car garage door in Everett typically runs $700 – $2,200 installed, depending on material and whether the opening needs a custom fit or a torsion retrofit. The free measure and written estimate give you the exact figure before any work starts. Call (844) 662-2561 for your estimate.
Yes. Deep, narrow lots off Broadway and around Glendale are common here, and our technicians are used to carrying a door and hardware through a side yard or over a fence where there’s no drive-up access. It adds some time to the job, not a reason to turn it down. Call (844) 662-2561 to set up the measure.
It can, but a converted garage means the door replacement has to respect setback and egress rules, so it’s worth checking with Everett’s building department before ordering. We’ll flag what to ask about during the measure and size the door to fit the opening you actually have. Call (844) 662-2561 to talk it through.
When you’re ready to replace that old Everett door, call (844) 662-2561 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, so we can come measure, quote, and get your new door ordered.
Written by the team at Garage Door Repair South Boston.